Surface of Direct casting /DC aluminum sheet for caps 8011 3105 consists of:
A: Mill Finished Direct casting /DC aluminum sheet for caps 8011 3105
B: Printed Direct casting /DC aluminum sheet for caps 8011 3105 It is usually supplied as: one side colored (golden/white/red/blue/black,etc), and other side transparent lacquer; or both sides transparent lacquer.
C: DOS lubricated Direct casting /DC aluminum sheet for caps 8011 3105
Specifications:
Alloy: 8011, 3105
Temper: H14, H16
Thickness: 0.15-0.25mm
Width: 500-1200mm
Length: 600mm--1000mm
Earing: 1%
Remarks: coils could also be supplied as per request
Tolerances:
Thickness: +/- 5%
Width/Length: +1, -0mm
Chemical Composition (%):
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
| Each | Total | |||||||||||
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | - | 0.1 | 0.05 | 0.15 | Remain |
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.10 | 0.20 | 0.05 | 0.05 | 0.10 | - | 0.08 | 0.05 | 0.15 | Remain |
Mechanical Properties:
| Alloy | Temper | Thickness(mm) | U.T.S(Mpa) | Elongation(%) |
| 8011 | H14 | 0.15~0.25 | 125~155 | ≧2 |
| 3105 | H14 | 0.15~0.25 | 150~200 | ≧1 |